Next: AGOFFSET
Up: Abstract Command References
Previous: Abstract Command References
Subsections
|
Parameter |
Default Value |
|
|
CISCO |
|
DX |
((!VGWQ.AGG1.X1 + !VGWQ.AGG1.X2 - !VGWQ.AGE.X1 - !VGWQ.AGE.X2) * 0.5) |
|
DY |
((!VGWQ.AGG1.Y1 + !VGWQ.AGG1.Y2 - !VGWQ.AGE.Y1 - !VGWQ.AGE.Y2) * 0.5) |
|
PA |
( -90.0 - 2.0 * !TSCL.INSROTPA ) |
Replace the AG start to the center of the FOV of AG-CCD.
This command should be executed when auto-guiding is active, and
only once.
DX, DY, PA are parameters for maintenance, so you
should not set their value.
2001/08/02
Fumihide Iwamuro, Kentaro Motohara
Kentaro Motohara : kmotohara@ioa.s.u-tokyo.ac.jp