●FLI-CCDカメラデバイスの自動認識とデバイスファイルのパーミッション
su -
cd /etc/udev/rules.d

udevinfo -a -p /sys/class/usb/fliusb0
udevinfo -a -p /sys/class/usb/fliusb1

cat << EOF > fli.rules
BUS=="usb", ACTION=="add", \
SYSFS{idVendor}=="0f18", SYSFS{idProduct}=="000a", ENV{DEVICE}!="", \
RUN+="/sbin/insmod /usr/local/lib/fli/fliusb.ko"

# This is the ID presented once the firmware has been loaded.
BUS=="usb", ACTION=="add", \
SYSFS{idVendor}=="0f18", MODE="0666", SYMLINK+="sbig.%n"
EOF